Help Make “The Essential Guide to Electronics in Shenzhen” a Reality

Readers of my blog know I’ve been going to Shenzhen for some time now. I’ve taken my past decade of experience and created a tool, in the form of a book, that can help makers, hackers, and entrepreneurs unlock the potential of the electronics markets in Shenzhen. I’m looking for your help to enable a print run of this book, and so today I’m launching a campaign to print “The Essential Guide to Electronics in Shenzhen”.

As a maker and a writer, the process of creating the book is a pleasure, but I’ve come to dread the funding process. Today is like judgment day; after spending many months writing, I get to find out if my efforts are deemed worthy of your wallet. It’s compounded by the fact that funding a book is a chicken-and-egg problem; even though the manuscript is finished, no copies exist, so I can’t send it to reviewers for validating opinions. Writing the book consumes only time; but printing even a few bound copies for review is expensive.

In this case, the minimum print run is 1,000 copies. I’m realistic about the market for this book – it’s most useful for people who have immediate plans to visit Shenzhen, and so over the next 45 days I think I’d be lucky if I got a hundred backers. However, I don’t have the cash to finance the minimum print run, so I’m hoping I can convince you to purchase a copy or two of the book in the off-chance you think you may need it someday. If I can hit the campaign’s minimum target of $10,000 (about 350 copies of the book), I’ll still be in debt, but at least I’ll have a hope of eventually recovering the printing and distribution costs.

The book itself is the guide I wish I had a decade ago; you can have a brief look inside here. It’s designed to help English speakers make better use of the market. The bulk of the book consists of dozens of point-to-translate guides relating to electronic components, tools, and purchasing. It also contains supplemental chapters to give a little background on the market, getting around, and basic survival. It’s not meant to replace a travel guide; its primary focus is on electronics and enabling the user to achieve better and more reliable results despite the language barriers.

Below is an example of a point-to-translate page:

For example, the above page focuses on packaging. Once you’ve found a good component vendor, sometimes you find your parts are coming in bulk bags, instead of tape and reel. Or maybe you just need the whole thing put in a shipping box for easy transportation. This page helps you specify these details.

I’ve put several pages of the guide plus the whole sales pitch on Crowd Supply’s site; I won’t repeat that here. Instead, over the coming month, I plan to post a couple stories about the “making of” the book.

The reality is that products cost money to make. Normally, a publisher takes the financial risk to print and market a book, but I decided to self-publish because I wanted to add a number of custom features that turn the book into a tool and an experience, rather than just a novel.

The most notable, and expensive, feature I added are the pages of blank maps interleaved with business card and sample holders.

Note that in the pre-print prototype above, the card holder pages are all in one section, but the final version will have one card holder per map.

When comparison shopping in the market, it’s really hard to keep all the samples and vendors straight. After the sixth straight shop negotiating in Chinese over the price of switches or cables, it’s pretty common that I’ll swap a business card, or a receipt will get mangled or lost. These pages enable me to mark the location of a vendor, associate it with a business card and pricing quotation, and if the samples are small (like the LEDs in the picture above) keep the sample with the whole set. I plan on using a copy of the book for every project, so a couple years down the road if someone asks me for another production run, I can quickly look up my suppliers. Keeping the hand-written original receipts is essential, because suppliers will often honor the pricing given on the receipt, even a couple years later, if you can produce it. The book is designed to give the best experience for sourcing components in the Shenzhen electronic markets.

In order to accommodate the extra thickness of samples, receipts and business cards, the book is spiral-bound. The spiral binding is also convenient for holding a pen to take notes. Finally, the spiral binding also allows you to fold the book flat to a page of interest, allowing both the vendor and the buyer to stare at the same page without fighting to keep the book open. I added an elastic strap in the back cover that can be used as a bookmark, or to help keep the book closed if it starts to get particularly full.

I also added tabbed pages at the beginning of every major section, to help with quickly finding pages of interest. Physical print books enable a fluidity in human interaction that smartphone apps and eBooks often fail to achieve. Staring at a phone to translate breaks eye contact, and the vendor immediately loses interest; momentum escapes as you scroll, scroll, scroll to the page of interest, struggle with auto-correction on a tiny on-screen keyboard, or worse yet stare at an hourglass as pages load from the cloud. But pull out the book and start thumbing through the pages, the vendor can also see and interact with the translation guide. They become a part of the experience; it’s different, interesting, and keeps their attention. Momentum is preserved as both of you point at various terms on the page to help clarify the transaction.

Thus, I spent a fair bit of time customizing the physical design of the book to make it into a tool and an experience. I considered the human factors of the Shenzhen electronics market; this book is not just a dictionary. This sort of tweaking can only be done by working with the printer directly; we had to do a bit of creative problem solving to figure out a process that works to bring all these elements together that can also pump out books at a rate fast enough to keep it in the realm of affordability. Of course, the cost of these extra features are reflected in the book’s $35 cover price (discounted to $30 if you back the campaign now), but I think the book’s value as a sourcing and translation tool makes up for its price, especially compared to the cost of plane tickets. Or worse yet, getting the wrong part because of a failure to communicate, or losing track of a good vendor because a receipt got lost in a jumble of samples.

This all bring me back to the point of this post. Printing the book is going to cost money, and I don’t have the cash to print and inventory the book on my own. If you think someday you might go to Shenzhen, or maybe you just like reading what I write or how the cover looks, please consider backing the campaign. If I can hit the minimum funding target in the next 45 days, it will enable a print run of 1,000 books and help keep it in stock at Crowd Supply.

Thanks, and happy hacking!

19 Responses to “Help Make “The Essential Guide to Electronics in Shenzhen” a Reality”

  1. […] (adsbygoogle = window.adsbygoogle || []).push({}); Source link […]

  2. Phil says:

    Why not just go with Print On Demand and/or release a Kindle eBook? See e.g.

    Personally I nearly always prefer eBooks these days. They weigh nothing, can be viewed on multiple devices, and can be purchased and used in seconds.

    • J. Peterson says:

      Having been to HQB, I can see why bunnie is producing a physical book. This isn’t just a book you read on the couch for information; it’s also a working tool while you’re actually at the market. Things like pouches for cards and spec sheets don’t exist with ebooks.

  3. […] Help Make “The Essential Guide to Electronics in Shenzhen” a Reality […]

  4. Bunnie,

    Sounds like a great book, but you don’t need funding to publish.

    1. Review copies — find a book store that has an espresso book machine; provide *.pdf copy of your book and cover; print just enough copies for reviewers at relatively low cost per copy. One location:
    2. Publication – set up CreateSpace account and follow the process. You may wish to buy ISBN numbers from Bowker. Otherwise only cost is proof copies.
    When approve proof copy for production, you book will be soon available through Amazon and other outlets with a nice royalty coming to you. You can order copies at a significant discount for promotion. Join the Amazon affiliates (or associates can’t remember which) program, link to Amazon through your website, and get an additional bump on royalty returns.
    Much much easier and better distribution than trying to publish it yourself.

    Best wishes,


  5. J. Peterson says:

    The way you ended page 11 in the sample is marketing genius. My order is placed.

    • bunnie says:

      lol — honestly, I had to look that one up. I didn’t realize the page split right across that phrase!

      Thanks for your support! :)

  6. TAKASU says:

    What’s a interesting Project!
    I backed already, really looking to see your book.

    I hope so trancerate to Japanese version when I got it.

  7. Dom says:

    Fantastic! Can’t wait to get mine. :)

  8. cflee says:

    The card/sample holders look like a fantastic idea, I can totally see why you want to print and publish this to your specs. Any chance of picking this up in Singapore?

  9. Sourcerer says:

    Will it be compatible with other existing Filofax inserts, so that I have the freedom to add pages from other vendors? I understand that the design requirements will make compatibility likely a tough goal. Or will it have a proprietary punching/binding? Can you provide open design files for the paper format and the punching, so that people can produce their own inserts?

  10. KeithFromCanada says:

    As a service to others, may I suggest that you create a script to send a link for here to every single electronics-based Kickstarter/etc. project in existence? :grin:

  11. […] barrier and the size of the place makes it an intimidating destination. That’s why hacker Bunnie Huang – co-creator of the Novena open source laptop – wrote a book to help fellow hackers and […]

  12. Tom Keddie says:


    Do you include days of the week and perhaps times and/or number of hours? When being asked to wait for a runner to bring something back I’ve often found it hard to establish exactly when that will be.

    ps. my favorite is please make a handle out of tape, have wished for that one a few times.

  13. Chuck Petras says:

    You rock! I’m in for 2 copies.

    How close are we to one-button manufacturing?

    I’m mentoring university senior design projects. It would be nice if there were a relatively painless way to get populated pcb’s.

    For instance

  14. Jammer says:

    Wow, it’s a very interesting project. It’s just an awesome idea… is it possible to get in Italy?

  15. Good afternoon Mr. Huang,

    My name is Diane Trommer, and I am editorial director of a B2B supply chain journal “Supply Chain Navigator” ( from Avnet Electronics. I am reaching out to you today to propose what I think would be a mutually-beneficial collaboration.

    For our next issue, June 2016, we will be putting together an editorial spotlight package on supply chain risk, which will address a variety of issues, from physical risk, cyber security and, of course, counterfeit components. I would like to offer you the opportunity to contribute either an original commentary or an excerpt from the chapter “Is it Fake” from your upcoming book “The Essential Guide to Electronics in Shenzhen.”

    I think your perspective on the counterfeit issue would be particularly interesting to our readers – supply chain executives in the high tech sector, who are so often told “think like a hacker” when it comes to supply chain security and component authenticity. Beyond the value to our readers, the article would provide great exposure for your book, as our publication reaches more than 150,000 purchasing, supply chain, manufacturing, operations and logistics professionals throughout the global electronics industry.

    I have included some information below about our publication to give you an idea of what we do. Though we have not aggressively marketed the publication, we are getting a great deal of attention and support from key decision makers and thought leaders in the high tech supply chain. Past contributors have included:

    Paul Blom, Chief Procurement & Supply Chain Officer
    Celestica Inc.

    Alex Brown, Vice President, Supply Chain
    Xilinx, Inc.

    Mike Cacheiro, Vice President of Global Supply Chain
    Lockheed Martin Space Systems Company

    Don Hnatyshin, Chief Procurement and Supply Chain Officer
    Jabil Circuit

    Dr. Hau Lee, Thoma Professor of Operations, Information and Technology
    Stanford Graduate School of Business

    Mick Jones, Vice President of Global Logistics and Supply Chain Strategy
    Lenovo Group Ltd.

    Tom Linton, Chief Procurement and Supply Chain Officer
    Flextronics International Ltd.

    Hans Ehm, Head of Supply Chain Innovations
    Infineon Technologies

    Ray Ernenwein, former Director, Supply Chain Strategy

    I would love to discuss this opportunity further with you at your earliest convenience. Please let me know when would be a good time.
    Thank you for your time and consideration
    My best

    About Supply Chain Navigator
    Supply Chain Navigator is an online journal, produced 3x a year by Avnet Electronics Marketing. SCN provides readers with practical tools and strategic insights they need to accelerate their organization’s drive to success. Each issue is produced in collaboration with supply chain professionals experienced in managing complex global supply chains both upstream and downstream, as well as distinguished academics and prominent market analysts. The publication reaches more than 150,000 purchasing, supply chain, manufacturing, operations and logistics professionals throughout the global electronics industry

  16. James Jackson says:

    I saw you on BBC click this weekend and I wondered if you could help me or put me in touch with anyone that could help. (you will make a lot of out camera fans very happy if you can)

    I developed a digital project for old 35mm still cameras, Canon, Nikon extra (I’m of that age before digital and still have my wet film cameras, ex professional photographer born 1955) I designed, built and named the “Digipod” but had a hell of a job finding someone to supply me a full size sensor (35x28mm) of any useful pixel def.

    If I can find the sensor supplier at the right price I would go into production with the “Digipod” and would need representation at production.

    Any help you can offer would really be appreciated, thank you