Name that Ware, April 2019

The ware for April 2019 is shown below:

May came up on me quick this year! Happy labour day to most of the world.

10 Responses to “Name that Ware, April 2019”

  1. Adi says:

    rotational molding

    • marble says:

      Yeah, It looks like the jig you need to make chocolate santas and easter bunnies.

    • Barry Callahan says:

      Yeah. The disks are rotating about the hub at a slower rate than they’re going around the shaft. This would be to ensure that the liquid material (likely a plastic or resin of some sort) inside the molds forms as even a coat as possible as it solidifies.

      You can even see hoses going from the central hub to several of the molds. (I’m not 100% sure whether they’re going to all of them or not — small image, lighting) These would likely be used for injection of material into the molds.

    • jackw01 says:

      Here’s a youtube channel with videos of a machine very similar to this one being used for rotomolding large plastic parts: https://www.youtube.com/channel/UCrWqfS6Icb1DExOghx-tVRw/videos

  2. Dave says:

    High-G training centrifuge for hamsters.

  3. Taylan says:

    Rotational casting or rotocasting machine. I cannot say if it’s a rotational molding machine as those require heating of the material as far as I know. But it doesn’t look like this one has any heating going on at all, a few have cables running but not all. Liquid resin is sloshed around until it cures.

  4. My brother recommended I might like this website.
    He was entirely right. This submit truly made my day.
    You can not believe simply how a lot time I had spent for this info!
    Thank you!

  5. Jin says:

    Rotational casting machine :D Saw one in action before.
    https://www.youtube.com/watch?v=QaSv3yfbBxU

    There is a lot of sphere it making. They must be try to get the seam off the outlook and use rotational casting instead of injection moulding.

  6. S Wood says:

    Yes, rotational molding will leave no seams in the part so no leaks. Great for custom reservoirs for tight spaces in your custom equipment.

Leave a Reply