Name that Ware, November 2019

December 1st, 2019

The Ware for November 2019 is shown below.

This is one half of the ware, and the more “generic” half. I left some pretty important hints during the cropping of this ware, though — if it’s too hard, I’ll add an image of the other half.

I also found the memory daughter card to be amusing, here’s a detail shot of it, removed:

Winner, Name that Ware October 2019

December 1st, 2019

The Ware for October 2019 was a TomTom Multisport Cardio. After many years of reliable service it finally developed a small leak which lead to the failure of some buttons, and ultimately an inability to transfer data. Had to tear it apart and dry it out to extract the logs from the watch’s final journey, and figured it’d make an interesting ware to share. It was guessed very quickly, as I had expected — congrats to Ed Marshall, email me for your prize!

Name that Ware, October 2019

October 30th, 2019

The Ware for October 2019 is shown below.

Should be a much easier ware than last month’s :)

Solution, Name that Ware September 2019

October 30th, 2019

The ware for September 2019 is an Ameda Purely Yours Breast Pump. There’s actually a teardown of this ware on another blog. The gold strips are positions sensors for a syringe pump driven by a lead screw. I have been puzzling over design strategies for syringe pumps for a while, so I found looking at this ware to be particularly instructive.

Nobody even got close to guessing the ware, so there isn’t a winner this month. Thanks again to jackw01 for submitting this real stumper of a ware!

Name that Ware September 2019

September 30th, 2019

The Ware for September 2019 is shown below.

Zilog. Now there’s a name that brings back memories!

Thanks to jackw01 for contributing this ware!