The ware for February 2008 is shown below. Click on any of the images for a larger version.

The past two Name that Wares were fairly easy, so I thought I’d make this one a little more challenging — and yes, this month I can offer again a dent-and-scratch chumby as the prize! This one involves silicon reading — for those unfamiliar with the art of reading silicon, check out May 2006’s name that ware and the primer post (has this competition really been going on for that long? I should make a picture calendar of past Name that Wares).

In the above photos, there is a single unit cell, replicated a few times, and the objective is to correctly name the function of the unit cell. There is sufficient information in the above micrographs to derive an exact schematic of the unit cell. The top photo is a zoomed-in version with all layers intact; the middle photo is a confocal image of the unit cells with all metal stripped back, revealing just the polysilicon gates. The bottom photos is an all-metal intact context photo for the unit cells. The photos are, as usual, decaped, delayered, and imaged by the skilled hands at Flylogic!

The ware for January 2008 was a Tangent Quattro internet radio alarm clock, and the winner is vt! Congratulations. Picking a winner, as usual, was not easy, but vt had both the most timely answer and an adequate set of follow-up explanations revealing the thought process behind the guess. Azer gets an honorable mention for using pixel scaling off of a known reference geometry (the USB plug) to determine the size of the device and narrow down the possibilities; I thought that was clever.

Some of the details of the Tangent Quattro were interesting. It’s basically a speaker that happens to have an embedded linux computer with wifi inside it — in other words, the speaker was designed first, and then the electronics were fitted around the acoustic chamber. I think that’s a good methodology for designing any integrated hi-fi device like this. On the back panel of the device is a slogan of sorts that I got a chuckle out of:

Here is a photo of the Reciva module’s front side:

Since the processor is an ARM9 architecture device, I took the liberty of reading out the ROM and mounting its JFFS2 filesystem on a chumby, and poking around a bit. It’s interesting to see their method for storing configuration information such as WEP keys, access point settings, and alarms…but I digress.

Above is a photo of the antenna they use. You might recognize it — it’s a standard 802.11 access point antenna. It’s not a terrible idea to stick with things that just work, especially if you have the space and cost headroom to afford such an antenna.

Above is a photo of the back panel CCA for the radio. The interesting part is how they implemented the 100baseT connection — it’s essentially the guts of a USB dongle laid out into the PCB (upper right hand corner of the CCA). This is an ever more popular approach, as I’m finding that USB has gotten so cheap and easy to integrate that it’s no longer just for external peripheral interconnect — it’s becoming usable as an inside-the-box interconnect standard as well.